Sale
NICETOWN Gray Blackout Curtains for Bedroom 84 inch Long 2 Panels - Thermal Curtains & Drapes Grommet Room Darkening Curtains Noise Reducing Window Treatments for Living Room...
Original price was: $24.93.$19.94Current price is: $19.94.
Sheer Navy Blue Curtains 84 inch Length 2 Panels Set, Airy Soft-Touching Rod Pocket Voile Drapes for Living Room/Bedroom, Each 40W x 84L
Original price was: $7.97.$6.77Current price is: $6.77.
- UV BLOCKING & GLARE CONTROL: KESPEN sun blocking window film can effectively block 82% of infrared rays and 90% of UV rays which may hurt your skin, prevent your precious furniture and interior decorations from fading. 12% VLT means that some visible light can enter the room, not only to block the harsh light and reduce glare, but also to maintain your good view.
- HEAT CONTROL & ENERGY SAVING: The window tinting film for home reflects some of the heat back outside, thus reducing the amount of heat transmitted through window glass, which can keep cool in summer and retain heat in winter, helping you save money by cutting the high energy bills.
- ONLY DAYTIME PRIVACY PROTECTION: This one way window film provides superb privacy during daytime, the mirror reflection of privacy control window film allows others to not see any interiors from the outside, effectively protecting your private space. But when inside light is stronger than outside, loss of light difference, such as the lights turning on, the mirror effect will disappear and will be seen from the outside. So at night with this mirror tint, it is necessary to draw the curtains.
- STATIC CLING & EASY TO INSTALL: The reflective window film is designed with non glue, this static cling window film avoids the release of chemical substances, very easy to use just spray A LOT of water on both the adhesive side and the window. It can also be removed easily without any traces left on the glass.
- WIDELY APPLICATION OCCASIONS: Our house window tint film is suitable for the smooth and clean glass surface of your kitchen, sliding door, bedroom, balcony, restroom, office doors, and windows. Not applicable to double-paned glass, frosted glass, cut glass, and all processed glass. Useful Tips: Please make sure the glass, edges, and corners are totally cleaned without any dust and tear off the protective film before pasting it onto the glass.
| Material |
Vinyl |
|---|---|
| Brand |
KESPEN WINDOW FILMS |
| Color |
Black-silver |
| Size |
17.5 Inch X 6.5 Feet |
| Product Dimensions |
78"L x 17.5"W |
| Installation Type |
Static Cling |
| Ultraviolet Light Protection |
Block 90% UV Rays |
| UPC |
682141268183 |
| Manufacturer |
KESPEN |
| Unit Count |
9.49 Sq Ft |
| Item Weight |
9.6 ounces |
| Country of Origin |
China |
| Assembly required |
No |
| Batteries required |
No |
9 reviews for KESPEN Window Privacy Film One Way Daytime Privacy Static Cling Sun Blocking Anti UV Reflective Window Tint for Home and Office, Black-Silver, 17.5 Inch X 6.5 Feet
You must be logged in to post a review.
YOU MAY ALSO LIKE…
RELATED PRODUCTS
DocaDesign.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
I may earn a small commission for my endorsement, recommendation, testimonial, and/or link to any products or services from this website.
D –
I was worried that I was going to make my house look silly with industrial looking reflective window coverings. Not at all. It isn’t super shiny, which is a positive. However it does substantially reduce the temperature of the room that has large west facing windows. I was hoping it would work but had little faith. I am really surprised how well the film is working and thinking of getting it for to put in all the windows. We used it in our north facing windows in our bedroom to block a the brightness of the morning sun and that worked too. It’s like putting sunglasses on, I can still see the sun, but it doesn’t blind me. Really happy with this product. Make sure to get a spray bottle and squeegee for easy application. There were a few bubbles when I finished putting on the film, but a few days later after the water had time to evaporate, they were gone. I needed an extra set of hands while putting it on, but with two people it was pretty easy to hang. I haven’t tried to take it down, but it seems like it would be really easy to remove. I think it’s priced a little too high for what it is to be honest. Hoping I’ll see some savings in my electric bill this summer though.
K Dyson –
its like putting a giant sunglass over your window, works great!
Kristen Parker –
Very good product. I only wish if they can send holders or something to hold film while installing .it’s bit tough with bare hand to hold on edges whiles finishing install
Richard Baumert –
These were not that hard to install, if you follow instructions and take your time they can look very good. My pictures show during daytime you cannot see inside, and you can see outside with minimal visual distortion. I did not take night pictures, but at night you can see inside. The only downside to these is that looking from inside to the outside at night seemed very poor.
This is what I found to work best for install.
If you have plenty of material left over after cutting out what you need, use some of the excess to practice with.
1. Get a good squeegee – I got this one EHDIS Small Squeegee 5 inch Rubber Window Tint Squeegee for Car, Glass, Mirror, Shower, Auto,Windows
2. Thoroughly clean your windows. Don’t just wipe them down, clean them. Clean them a few times.
3. Measure the glass you want to cover, then add at least a half inch to each edge. So if your window is 20″ wide, you want at least 21″ of material or more.
4. Cut your material to the amount you just figured out.
5. Make a spray bottle of soapy water. Don’t go crazy with the soap, just a drop or two is plenty.
6. Spray your window so that every inch is wet and the water is dripping down – you cannot get it too wet.
7. Peel the plastic protective sheet off the film.
8. Spray the cling side of the film (the same side that had the protective plastic) with your soapy water.
9. Give another couple sprays to the window, especially the top edge if your water has dripped down.
10. Place the film onto the window so that the edges overlap the window. The film will automatically cling to the window and some of the soapy water will go away. You can adjust the position of the film as necessary to get the edges overlapping.
11. Use the squeegee ONLY in a small section of the center of the window – DO NOT wipe to the edges. This will help the film stay in place while you cut it to fit. You do not want to squeegee to the edges because you still need the soapy water to help the edges stick after you get the film trimmed to size.
12. Use a sharp hobby/exacto knife to cut the film. Push the film down so that it gets as far into the corner of the glass and the frame as possible. I found it easier to start from the middle and work my way into the corners. Go VERY SLOW! A nice slow cut will help you cut straight. I also found it helpfull to cut an entire sliver off, and not just to the corner of the window.
13. Once you have it completely trimmed, use the squeegee starting from the center of the window and work your way to the outside edges. Do it multiple times, even if it looks like the soapy water is gone.
14. If you have any edges that are not sticking, gently pull the edge back far enough that you can spray more soapy water in there, then use the squeegee again.
D –
I normally don’t write reviews but I felt this product needs to be shared with those that live in warmer area or sun beats in. We live in Texas and I have all the black out curtains but this stuff works so well. We did one window to test the product and then decided to do the front of the home. After we got the hang of it putting it up is a lot easier and you can see what windows we have done and ones we haven’t. Definitely notice the rooms are cooler when it’s 105 outside! Love it and will order more to finish all our windows!
Richard Baumert –
The front of our house faces the west and there is not any trees or shade in the front of the house. There are 9 full windows and are all double pained. Also, we have a full storm door and the main door knob was too hot to use the electronic lock in the summer. I had purchased cellular window shades to try to keep the heat from the sun out of the rooms and while it works, it’s not as effective as I wanted. We have central air and needed to do something else since the front rooms were always really warm in the summer and the back rooms were not.
I had been doing research on how to reduce the effects of heat through the glass and also sun blocking and finally purchased these rolls.
Preparation work on the windows is a MUST. Clean them with window cleaner and then use a razor blade to make sure there isn’t anything stuck to each window. I used a cloth rag to brush away anything left on the window. If you don’t completely clear the windows, you will see the dirt streaks or marks under the film.
I used a piece of plywood enable me to measure and cut the film with an Exacto knife. The Draino bottles in the pictures were to hold the end of the film so I can measure and cut the film, using the T square to try to keep the cuts straight. I only cut the film from the roll and then did the final cuts on the window.
When installing I sprayed the window with a water/dishwashing solution then placed and used a small squeegee to push the water and air out of in-between the film and window enough to hold the film onto the window. Adhesion to the window was simple easy to use once the protective film was removed.
After getting the film stable on the window I then used a small straight edge ruler to push the film down and as close to the edge of the pane of glass and guide the knife along the edge of the window. Make sure you check all edges prior to cutting and take your time. The film cuts very easily.
There is a noticeable difference in temperature in the front rooms as I did all nine windows and the full storm door. I’m not sure about AC cost reduction yet. I do know that the bedrooms and front downstairs rooms are much cooler upstairs. The house seems to be more equalized in temperature with all this hot weather we have experienced recently. The door knob isn’t extremely hot in the afternoon. The windows do look a little different with the film and you can’t see into them during the day. The top windows in my picture are completed. We went with the silver film as it’s not completely “blacked out” and the window appears to just have a “shine” in them. That’s great and I am impressed with the film.
tina mcfarlane –
Se raya muy facil al limpiar la ventana
Kristen Parker –
Easy to install compared to adhesive film. UV filtering really works.
Prime –
You do not get much in a roll. I only wanted enough for four small windows at the front of my house. I had just enough for four, which was kind of annoying because I messed up on the first one so now I only have 3/4 windows with it on. Very little room for error. But it was easier to put up (with someone helping) than I thought it would be. It was frustrating trying to put it on and smooth it out and wet it down by myself, an extra pair of hands helped but isn’t really needed. I also found that just measuring it to exact size instead of bigger like they suggest is better because cutting the extra off after it’s on the window is really fickle and keeps letting bubbles in the sides.